Description
Our range of single groove rollers is listed in the table below. For rollers with two or more grooves, please see multi groove rollers.
The list is sorted by the ØA dimension, in ascending order. You can sort the rollers by any dimension, in ascending or descending order, by clicking on the column header.
Use the diagram to find the roller you require.
CS = countersunk bore for screw
*asymmetric groove
| Ref. No | ⌀A mm | ⌀B mm | ⌀R mm | W mm | ⌀C1 mm | ⌀C2 mm |
|---|---|---|---|---|---|---|
| T34 | 14.0 | 3.2 | 10.0 | 8.0 | ||
| T2 | 14.0 | 4.3 | 10.0 | 10.0 | ||
| T42 | 14.0 | 3.5 | 8.0 | 10.0 | 6.5 x 3.0 | |
| T3 | 16.0 | 4.0 | 10.0 | 9.0 | ||
| T4U | 16.5 | 4.0 | 8.5 | 9.0 | ||
| T4V | 16.5 | 4.0 | 8.5 | 9.0 | ||
| T28 | 17.0 | 4.0 | 10.0 | 9.0 | ||
| T37 | 17.0 | 5.0 | 8.0 | 7.0 | ||
| T25 | 17.0 | 6.0 | 8.0 | 11.0 | ||
| T47 | 17.0 | 3.3 | 10.0 | 9.5 | ||
| T32 | 18.0 | 5.0 | 10.0 | 8.0 | ||
| T23 | 18.2 | 3.3 | 9.5 | 9.0 | ||
| T9 | 19.0 | 3.2 | 10.2 | 12.8 | ||
| T33 | 17.25 | 4.3 | 9.5 | 11.0 | 9.5 x 2.0 | |
| T45 | 20.0 | 4.3 | 10.0 | 14.1 | 14.4 x 2.0 | 14.4 x 2.0 |
| T44 | 20.0 | 6.0 | 8.0 | 10.0 | ||
| T13A | 20.5 | 5.0 | 10.0 | 13.5 | CS | |
| T13 | 20.5 | 3.0 | 10.0 | 13.6 | 7.8 x 3.0 | |
| T36 | 23.5 | 9.6 | 15.0 | 8.0 | ||
| T35 | 24.9 | 6.0 | 14.1 | 13.1 | 9.0 x 1.5 | |
| T15 | 25.0 | 6.0 | 10.0 | 18.0 | 9.0 x 1.5 | |
| T38 | 25.6 | 4.0 | 20.0 | 7.8 | 15.2 x 1.3 | 15.2 x 1.3 |
| T26* | 29.3 | 6.0 | 16.5 | 14.0 | 9.0 x 1.5 | 9.0 x 0.8 |
| T27* | 29.3 | 6.0 | 10.0 | 14.0 | 9.0 x 1.5 | 9.0 x 0.8 |
| T39 | 29.8 | 6.0 | 17.2 | 9.0 | 9.0 x 2.0 | 9.0 x 0.8 |
| T21 | 38.7 | 4.0 | 26.0 | 9.0 | ||
| T21A | 38.7 | 6.3 | 26.0 | 9.0 | ||
| T29 | 39.0 | 10.0 | 21.0 | 16.0 | ||
| T30 | 39.0 | 15.0 | 21.0 | 16.0 |
CS = countersunk bore for screw
*asymmetric groove
